Assembly And Commissioning; Delivery; Transport - Grizzly G0884 Owner's Manual

3 Assembly and commissioning

INFORMATION
The CNC machine is completely pre-assembled. It is delivered in a wooden box.
3.1 Delivery volume
Take all parts out of the packaging and compare them to the attached packing list.
Check the status of the CNC machine upon receipt and immediately claim eventual damages
at the last carrier even if the packing is not damaged. In order to ensure claims towards the
freight carrier we recommend you to leave the machines, devices and packing material for the
time being in the status at which you have determined the damage or to take photos of this sta -
tus. We would like to ask you to inform us about any other claims within six days upon receipt of
the delivery.
Check if all parts are firmly seated.
3.2

Transport

WARNING!
Severe or fatal injuries may occur if the machine or parts of the machine tumble or fall
down from the forklift truck or from the transport vehicle. Follow the instructions and
information on the transport case:
• Centers of gravity
• Load suspension point
(Marking of the positions for the load
suspension)
• Prescribed transportation position
(Marking of the top surface)
• Means of transport to be used
• Weights
WARNING!
The use of unstable lifting and load handling equipment that might break under load
can cause severe injuries or even death.
Check that the lifting and load suspension gear has sufficient load capacity and that it
is in perfect condition.
Observe the regulations for accident prevention.
Fasten the loads properly.
Do not walk under lifted loads!
Model G0884 (Mfd. Since 02/19)
-21-