Table of Contents
Advertisement
mControl
5.4. Performing an Update with the MasterControl 2 (mc²)
Under the menu item "Updates" of the mc² toolbox, you can carry out updates for further
digital devices for the EasyControl digital system, e.g. for your mControl. The prerequisite is
that the device is connected to your mc² via the EasyNet interface.
Section of the "Update" interface of the mc² toolbox:
Click the "Browse" button and select the file with the current firmware that you have saved on
your PC. Start the update.
5.5. Finishing the Update
Disconnect the connections to the EasyNet and the power supply.
Remove the jumper from the pins of the pin header and screw the housing cover back on.
Re-establish all connections that are necessary for operation.
11
Advertisement
Table of Contents
