Table of Contents
Advertisement
mControl
3. Connection of the mControl
EasyNet connection of the central unit (MasterControl, RedBox, mc²)
Use the enclosed patch cable or a commercially available
1:1 patch cable of any length (RJ45). If the EasyNet connection of
the control panel is already occupied by another device,
Märklin** devices for
controlling accessory
decoders:
Keyboard 6040 and / or
Memory 6043
Make the connections in the
same way as the
corresponding connections
to the Märklin**
Control Unit.
Plug-in power supply unit (not included in the scope of delivery)
6
see the following section.
Power supply (Power):
Voltage: 12 to 16 volts direct or alternating voltage
Current: min. 1 A
Märklin** devices for
controlling vehicle decoders:
Control 80 or Control 80F
driving consoles and / or
other additional devices,
offered to complement the
two versions of the Control
Unit (e.g. Infra Control 80F).
Make the connections in the
same way as the
corresponding connections
to the Märklin**
Control Unit.
Advertisement
Table of Contents
