tams elektronik mControl 40-01607 Manual page 7

Separate power supply unit for the mControl!
! !
A separate power supply unit is required to supply the mControl and the connected
Märklin** control units. Do not connect the mControl and the Märklin** control units to a
transformer or a power supply unit that supplies other units! The connected devices can be
irreparably damaged in this case!
Only use 1:1 patch cables!
!
Never use crossover cables for connections to the EasyNet! This may cause irreparable
damage to the central unit!
Connecting several external control units or adapters to the EasyNet
You can connect a total of up to 64 external control units or adapters to one EasyNet. To
enable the use of several digital control units on one interface, you can use distributors:
Y distributor RJ45
Input: 1 x RJ45
Output: 2 x RJ45
EasyNet distributor
Input: 1 x RJ45 | Output: 4 x RJ45
(item no. 73-80190-01)
(item no.73-80195-01)
for the connection of
max. two external control units
or adapters
for the connection of
max. four external control units
or adapters
mControl
7