Issued By: RBC Bioscience Corp.
6. Screws off the 4 fixing screws (3mm hex wrench) on the elevator motor and the 2
screws (1.5mm hex wrench) on the timing wheel. Then detach the elevator motor
from the machine.
7. Install a new elevator motor.
8. Attach the timing belt and the timing wheel on the elevator motor.
9. Attach back the transmission axle and eccentric wheel.
10. Plug in the power connection of the elevator motor.
11. The replacement of the elevator motor is finished.
MagCore HF48 Service Manual
Revised: February,2014
6
Ver. 2014-2
RBCBioscience
62