Table of Contents
Advertisement
Issued By: RBC Bioscience Corp.
MagCore HF48 Service Manual
Revised: February,2014
Ver. 2014-2
6. Screw off 4 screws (4mm hex wrench) on the X-axis servo motor.
7. Detach the whole X-axis servo motor.
8. Detach the shackles on the connecting bars of the X-axis servo motor.
9. Install the new X-axis servo motors one at a time.
10. The replacement of the X-axis servo motor is finished
6
RBCBioscience
52
Advertisement
Table of Contents
