Wiring; Assembling - Optex InSight INS-QXI-ST Installation Instructions Manual

1-4. Wiring

NOTE
The connector can be fixed inside
the main body with double-sided tape.

1-5. Assembling

Replace the main unit with the mount base.
1
Put the main body back on mounting plate.
Caution
8-pin I/O cable
DC power cable
12 V DC power for camera and PIR
Do not pinch the cable when restoring the PIR detector.
Pink
Orange
Yellow
Brown
Green
Purple
Black
Red
Waterproof cap
for LAN connection
Cut the rubber and put the LAN cable into
(a), then (b) will be assembled to (a) tightly.
As a final step, (c) need to be assembled
to (b) without making any space.
2
- 4 -
Installation
Tamper
Alarm
Do not connect to
Caution
the N/A terminal.
Power
PoE LAN cable
Step
1