Placing A Call; Answering A Second Call - Polycom SoundStation2W User Manual And Administrator Manual

Using SoundStation2W™
► For best performance, charge the console for a full charging cycle
(4 hours for BASIC, 8 hours for EX) prior to rst use.

Placing a Call

SoundStation2W™ allows you to place a call over an
analog line or through an analog terminal adapter (ATA).
Several methods are available to initiate a call.
Direct Dial
1. To obtain dial tone, press the
key.
2. Dial the desired number.
► To cancel the call, press the
key.
Answering a Call
Press the key or any number key to
answer an incoming call. Pressing the
button will override all other tele-
phone activities. The three LEDs will
blink green when the phone rings.

Answering a Second Call

If you are on a call when another call
is received, you will hear a tone if your
phone system is setup to support Call
Waiting.
► Press the Conference button
to answer the incoming call.
This rst call will be automati-
cally placed on hold.
Indirect Dial
1. From the Ready screen, dial the
2. Press the
► If you make a mistake entering
► Press the
► Switch back and forth between
SoundStation2W™ User Guide - 13
desired number.
key or the
soft key to make the call.
the telephone number, press the
soft key.
<DEL
CANCEL
cancel the call.
calls using the conference button
.
SEND
soft key to
SEND
OR