Polycom SoundStation2W User Manual And Administrator Manual page 9

LCD Message Summary
The following messages are displayed on the console LCD to represent various
usage conditions.
LCD Message What it means:
Phone is in idle state and ready to make calls.
Ready
Signal strength is too weak to carry a call.
No Signal
The call has been dropped.
Call Ended
A mobile phone is plugged in to the mobile phone
Mobile Phone In
jack OR a mobile phone call has been initiated.
Attempting to contact the base station to establish
Searching for
a connection.
Signal
Enter the number you wish to dial.
Enter Number
A charger is plugged in and battery is recharging.
Charging
Page button on base was pressed to locate the
Base Paging
console.
The charge in the battery has depleted. A
Battery Low
recharge is required to continue reliable operation
of your SoundStation2W™.
Phone received an incoming call.
Incoming Call
SoundStation2W™ User Guide - 26
What you will see:
Idle screen.
Antenna icon will show zero bars.
"Call Ended" with elapsed time
indicated.
"Mobile Phone In"
"Searching for Signal"
Digits of the number you are dialing.
"Charging"
Base paging. Press any key to stop
beeping.
The remaining talk time and an
audible warning tone.
"Incoming Call"