5. Unit design
6. Operation
6.1 ON/OFF
Press the "ON/OFF" button and hold it for about 2 seconds. The ON/
OFF indicator will lighten up and a self test will start after turning on
the detector. If the test is successful, the Value Display Window will
show the software version (see Fig. 1). Next two "0" will respectively
display on the Quantity Display Window and Value Display Window
(see Fig. 2). In this mode, the detector is ready for use.
To turn the unit off, press the "ON/OFF" button and hold it for about 2
seconds.
1. Limit Block
2. REP/DIR Button
3. Currency Type Display Win-
dow
4. Exit Direction Front
5. Exit Direction Rear
6. Value Display Window
7. Battery Information Indicator
8. Quantity Display Window
9. REP/ADD/DEN Modes
10. ON/OFF Button
11. CLR Button
12. Banknotes Feed Slot
13. Power Adapter Connection
14. Micro SD Slot
15. USB Upload Port
16. Banknotes Exit Slot
7
www.docash.de
Need help?
Do you have a question about the Golf and is the answer not in the manual?
Questions and answers