Parts Listing - IBM Brocade Installation And User Manual

Parts listing

Replaceable components are of three types:
•
•
•
For information about the terms of the warranty, see the IBM Warranty and Support Information
document on the IBM Support CD. The replaceable components in
TABLE 4
Name of component
Brocade 2-Port 10Gb Converged
Network Expansion Card (CFFh)
If other BladeCenter components require replacement, see the following documentation that
comes with these devices:
•
•
Notes:
1. The latest versions of these documents are at
http://www.ibm.com/systems/support/.
2. Cables are not required for the Brocade 2-Port 10Gb Converged Network Expansion Card
©Copyright IBM Corp. 2010
Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If
IBM installs a Tier 1 CRU at your request, you will be charged for the installation.
Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request IBM to
install it, at no additional charge, under the type of warranty service that is designated for your
server.
Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.
Replaceable components and corresponding CRU/FRU identifiers
Problem Determination and Service Guide
Installation and User's Guide
(CFFh). If you must install cables for other BladeCenter optional devices, see the IBM
Configuration and Options Guide at http://www.ibm.com/servers/eserver/xseries/cog/. If you
must install cables for BladeCenter components, see the cable-routing information in the
documentation that comes with the BladeCenter components and the cables.
CRU/FRU identifier
•
81Y1650 (Option)
•
81Y1654 (Tier 1 CRU)
Chapter
Table 4 are Tier 1 CRUs.
5
35