IBM Brocade Installation And User Manual page 35

FIGURE 3
7.
8. Reinstall the cover on the blade server or storage-expansion unit. For instructions, see the
9. Reinstall the blade server in the BladeCenter unit. For instructions, see the documentation that
Installing and Removing an Expansion Card
Removing the Brocade 2-Port 10Gb Converged Network adapter for IBM BladeCenter from a blade
server
If you are replacing the high speed adapter, follow the installation instructions in
page 20 through step 12
with step 8.
Installation and User's Guide that comes with your blade server or storage-expansion unit, and
the documentation that comes with your BladeCenter unit.
comes with your BladeCenter unit. Turn on the blade server, and continue with your
BladeCenter system activities.
Removing the high speed adapter from a blade server
on page 21. If you are not replacing the high speed adapter, continue
2
step 6 on
23