IBM Brocade Installation And User Manual page 62

B
Procedures
9. Select the LUN on the target device you that want to designate as the boot LUN for the host.
10. Press Enter. The selected device will be added to the list of boot devices for the adapter.
11. Save or exit the configuration utility.
50
This must be the same LUN that you bind to the adapter port using the storage system's
management or configuration utility.
NOTE
You only need to select the bootable LUN once. After the first boot, the same LUN will be used
until changed through the BIOS Configuration Utility.
•
To save the configuration, press the Alt and S keys.
•
To exit without saving press the Alt and Q keys.
Brocade 2-Port 10GbE Converged Network Adapter for IBM BladeCenter Installation and User's Guide