IBM Brocade Installation And User Manual page 61

7.
8. Select a target on which you want to designate a boot LUN and press Enter.
Using the BIOS Configuration Utility
Use the Up and Down arrow keys to select a boot device, then use one of the following options
to configure boot device settings:
•
Press C to clear a selected boot device from the list.
•
Press M to manually edit boot device information, then enter the PWWN and LUN values
for the boot device. Press M to exit.
•
Select a device and press Enter. This displays additional screens that allow you to select
discovered LUNs as boot devices.
If you select a device under Boot Device Settings and press Enter, a screen similar to the
following displays listing all discovered boot targets.
A screen similar to the following displays listing device information and LUNs visible to the
adapter.
B
Procedures
49