Magnetic Autocontrol MPH 112 Operating Instructions Manual page 48

Pedestrian Barrier High Door MPH 112
Electrical connection
Electric current
Hot surfaces
48
DANGER!
DANGER!
Mortal danger by electric current!
Touching live parts can be lethal.
Damage to the insulation or to individual
components can be lethal.
Therefore:
– Switch off the power supply immediately in case
of damage to the insulation and arrange repair.
– Only electrical specialists may carry out work on
the electrical system.
– Before starting work ensure that the electrical
system is dead!
– Always turn the power supply off and safeguard
against unintentional restarting before
maintenance, cleaning, and repair work.
– Never bypass or deactivate fuses.
– When replacing fuses observe the correct
amperage specification.
– Keep moisture away from live parts, this can
result in short-circuit.
The following safety devices have to be installed on
site. The safety devices have to be provided by the
customer.
– Lockable 2-pole mains switch
– Residual current device (RCD)
– Mains circuit-breaker
CAUTION!
CAUTION!
Danger of burns!
The heating unit, transformers or motors may have
a hot surface. Touching these hot surfaces can
lead to burns.
Therefore
– Do not touch these hot surfaces.
– After switching off the power supply wait some
minutes until these components have cooled
down.
– Wear protective gloves if necessary.
5817,5005EN / Version 01