Magnetic Autocontrol MPH 112 Operating Instructions Manual page 16

Hide thumbs Also See for MPH 112:
Table of Contents

Advertisement

Pedestrian Barrier High Door MPH 112
Safety
Risk of crushing
Electric current
16
CAUTION!
Risk of crushing!
... denotes the presence of components and items
moving towards each other. Non-observance of the
safety instructions can lead to minor injuries.
This pictogram is fixed on the following component:
– Drive units
Hazard notes and occupational safety
For your own safety and for the protections of the barrier
modules, the following information must be observed and
complied with:
DANGER!
Mortal danger by electric current!
Touching live parts can be lethal.
Damage to the insulation or to individual
components can be lethal.
Therefore:
– Switch off the power supply immediately in case
of damage to the insulation and arrange repair.
– Only electrical specialists may carry out work on
the electrical system.
– Always turn the power supply off and safeguard
against unintentional restarting before
maintenance, cleaning, and repair work.
– Before starting work ensure that the electrical
system is dead!
– Never bypass or deactivate fuses.
– When replacing fuses observe the correct
amperage specification.
– Keep moisture away from live parts, this can
result in short-circuit.
The following safety devices have to be installed on
site. The safety devices have to be provided by the
customer.
– Lockable two-pole mains switch
– Residual current device (RCD)
– Mains circuit-breaker
CAUTION!
DANGER!
5817,5005EN / Version 01

Advertisement

Table of Contents
loading

Table of Contents