End Of Operation - V-ZUG Combair V2000 45 Operating Instructions Manual

4 Operation
▪ Select one of the subsequent steps displayed to continue operation (see page
27).
▪ Select the
▪ Select the
▪ Press and hold the
If the application has been running for less than 1 minute when cancelled, the
ready to start screen appears.
Sabbath applications can only be cancelled using the
32).
Ending an application before time
▸ Press and hold the
– Any running application is ended; if switched on, the timer will remain active.
– If turned on, the display lock is deactivated.
– The appliance switches off (see page 28).
4.19

End of operation

When the set duration / the step duration is up.
– The application ends automatically.
– An acoustic signal is emitted.
– If subsequent steps are available, the following appears in the display: «The opera-
tion has finished. Do you want to proceed with a subsequent step?»
▸ Press «No» to end operation now.
▸ Press «Yes» to confirm the message.
– Depending on the application, the following available options are displayed:
▪ Select one of the subsequent steps displayed to continue operation (see page
27).
▪ Select the
▪ Select the
▪ Press and hold the
In EcoStandby as long as the temperature in the cooking space is over 80° C.
– In the display appears: «Residual heat in the cooking space». The actual cooking
space temperature is also displayed.
Food can be kept warm with residual heat for some time.
After 3 minutes without interaction.
– The display goes dark and the appliance switches off automatically (see page
28).
Removing the cooked food from the cooking space
Risk of burns!
Hot air may escape from the cooking space when the appliance door is opened.
The accessories get hot. Use protective gloves or oven cloths.
▸ Take the food out of the cooking space when done.
26
function button to access the parent application menu.
function button to access the start screen (see page 15).
function button to switch the appliance off (see page 28).
function button.
function button to access the parent application menu.
function button to access the start screen (see page 15).
function button to switch the appliance off (see page 28).
function button (see page