Table of Contents
Advertisement
4 Operation
If the application has been running for less than 1 minute when cancelled, the
ready to start screen appears.
Sabbath applications can only be cancelled using the
34).
Ending an application before time
▸ Press and hold the
– Any running application is ended; if switched on, the timer will remain active.
– If turned on, the display lock is deactivated.
– The appliance switches off (see page 29).
4.20
End of operation
When the set duration / the step duration is up or when the set target temperature is
reached.
– The application ends automatically.
– An acoustic signal is emitted.
– In the display appears: «Process finished».
▸ Press «OK» to confirm the message.
– Depending on the application, the following available options are displayed:
▪ Select one of the displayed subsequent steps to continue operation with another
application (see page 29).
▪ Select the
▪ Select the
▪ Press and hold the
In EcoStandby as long as the temperature in the cooking space is over 80° C.
– In the display appears: «Residual heat in the cooking space».
In EcoStandby if the food probe is plugged in.
– The food probe temperature is displayed.
The food can be kept warm with residual heat for some time. As soon as the tem-
perature falls below 80 °C, all the displays go out. If at this point the food probe is
still plugged in, the displays only go out when the food probe is unplugged. The
cooling fan can continue to run.
After 3 minutes without interaction.
– The display goes dark and the appliance switches off automatically (see page
29).
Removing the cooked food from the cooking space
Risk of burns!
Hot air may escape from the cooking space when the appliance door is opened.
The accessories get hot. Use protective gloves or oven cloths.
▸ Take the food out of the cooking space when done.
▸ Wipe away traces of water or soiling with a soft cloth to prevent corrosion and un-
pleasant odours.
▸ Leave the appliance door open in the airing position until the cooking space has
cooled down and dried out.
28
function button.
function button to access the parent application menu.
function button to access the start screen (see page 15).
function button to switch the appliance off (see page 29).
function button (see page
Advertisement
Table of Contents
