Proceed as described for the DayTrend L alarm (Section 12.1.7 on page 12-5).
12.1.9
Gas H
• Alarm type: Gas alarm
• Non-abbreviated description: Gas level High
• Priority: Medium
• Parameter(s) involved:
– GasAlr H (alarm set point); Gas;GasLevel submenu; Section 4.5.2.1 on page 4-16
– GasAlr Delay; Gas;GasLevel submenu; Section 4.5.2.1 on page 4-16
• Alarm cause(s): Gas level above the GasAlr H alarm set point.
Perform steps 2 to 5 in Section 12.1.5 on page 12-4.
12.1.10 Gas HH
• Alarm type: Gas alarm
• Non-abbreviated description: Gas level High-High
• Priority: High
• Parameter(s) involved:
– GasAlr HH (alarm set point); Gas;GasLevel submenu; Section 4.5.2.1 on page 4-16
– GasAlr Delay; Gas;GasLevel submenu; Section 4.5.2.1 on page 4-16
• Alarm cause(s): Gas level above the GasAlr HH alarm set point.
Perform steps 2 to 5 in Section 12.1.5 on page 12-4.
12.1.11 Gas L
• Alarm type: Fail alarm
• Non-abbreviated description: Gas level Low
• Priority: Medium
• Parameter(s) involved:
– Gas L; SysOK Relay;FaultTrig. submenu; Section 4.5.7 on page 4-23
– GasAlr L (alarm set point); Gas;GasLevel submenu; Section 4.5.2.1 on page 4-16
– GasAlr Delay; Gas;GasLevel submenu; Section 4.5.2.1 on page 4-16
• Alarm cause(s): Gas level below the GasAlr L alarm set point. Probably indicates a gas
level reading problem.
Perform steps 2 to 5 in Section 12.1.7 on page 12-5.
Part 17997
Alarm Messages on the Hydran 201Ti's Display
Rev. 6, March 2011
12-7