Chapter 5 • Before Installation
5.
The H201Ti weighs 5.6 kg (12 lb). If the selected valve is subject to strong vibrations,
install a supporting bracket to reduce the load on the valve. In case of doubt, consult
your engineering personnel.
5.2.2.2
Typical Locations
For a typical transformer, the four most common locations to install the Hydran 201Ti are
shown in Figure 5-9 on page 5-10.
2
Oil flow
4
Figure 5-9 - Mounting Locations of the H201Ti on a Transformer
1.
Radiator's return pipe: The recommended location to mount the H201Ti is on the
straight section of the radiator's return pipe, which is joining the bottom of the
radiator to the transformer's main tank (on the discharge side of the pump to avoid
5-10
Rev. 6, March 2011
3
1
Part 17997