Six lockwashers
Six 1/4-28 cap screws
Figure 6-8 - Fastening the Heating Plate to the Brass Adaptor
6.3.8
Installing the Cable Conduits
Note the following considerations prior to installing:
• All cables connected to the Hydran 201Ti must be run through steel conduits. Otherwise,
armored cables can be used.
All metallic conduits or cable shields must be connected to the
WARNING
CAUTION
ground at one point.
• Flexible rather than rigid conduits should be used near the H201Ti to ease installation
and servicing.
Part 17997
Sensor cable
Rev. 6, March 2011
Installation
6-25