Chapter 5 • Before Installation
10. Install the H201Ti horizontally; not at an angle, vertically or horizontally using an
elbow (see Figure 5-6 on page 5-6). Elbows may cause turbulence that can reduce the
accuracy of gas level readings. For details pertaining to the positioning of H201Ti's,
see Section 5.2.2.2 on page 5-10.
11. Do not subject the H201Ti or its sensor to high-pressure water streams (see
Figure 5-7 on page 5-6). Used during the cleaning of transformers, they may cause
serious damage.
5-6
Figure 5-6 - Do Not Install the H201Ti on an Elbow
Figure 5-7 - Avoid High-Pressure Water Streams
Rev. 6, March 2011
Part 17997