Wi-Fisettings - hanshow HS-AT3701 Product Manual

Hanshow Shelf Edge Digital Signage HS-AT3701 Product Manual
2. Select Wi-Fi or Ethernetaccordingto your network requirements.
4.1.1

Wi-Fisettings

Follow the steps below to configure Wi-Fi network connection:
1. Tap Wi-Fi to open the wireless network settings page.
2. On the upper-right corner of the page, tap the switch to turn on the Wi-Fi
connection function. The system automatically searches for available wireless
networks, and then lists available network access points, as shown in
24
Figure 4-1Network settings selection page
Figure
Hanshow Copyright Reserved ©
4-2.