hanshow HS-AT3701 Product Manual page 32

Hanshow Shelf Edge Digital Signage HS-AT3701 Product Manual
3. Tap the access point you want to connect. The setting page for the selected
wireless network opens.
4. If static IP setting is not required, enter the wireless network password directly,
and then tap the Complete button on the soft keyboard. The system automatically
connects to the wireless network, as shown in
is correct, the system connects to the wireless network successfully, and shows
message indicating successful network connection. Thiscompletes the DHCP
(dynamic IP assignment) configuration of the wireless network.
25
Figure 4-2 Turn on wireless network connection
Figure 4-3. If the entered password
Hanshow Copyright Reserved ©