Ethernet Settings - hanshow HS-AT3701 Product Manual

Hanshow Shelf Edge Digital Signage HS-AT3701 Product Manual
Configuration item
DNS
After the configuration is complete, tap the Save button. The system automatically
connects to the wireless network according to the configurations. If the connection is
successful, the screen displays "Connected", as shown in
Figure 4-5 Wireless network connected successfully
4.1.2

Ethernet settings

Follow the steps below to configure Ethernet connection:
29
Domain name servers, including DNS1 and DNS2. DNS1 is the
primary DNS server. Only when DNS1 cannot find IP addresses
corresponding to domain names or when DNS1 is unavailable, can
DNS2 configuration take effect. This configuration item can be
configured when DHCP is selected for IP settings.
Description
Figure 4-5.
Hanshow Copyright Reserved ©