Troubleshooting; Cleaning And Care - Zoofari ZTPS 6 D1 Operation And Safety Notes

Pet grooming set
Hide thumbs Also See for ZTPS 6 D1:
Table of Contents

Advertisement

Storage case
:
11
Keep all accessories of the pet grooming set neatly
and space-saving in the storage case
Claw clipper
:
12
Use the claw clipper
12
The locking mechanism secures the claw clipper
in the closed position. Release the lock when using
the claw clipper
.
12
Note: It is recommended that 2 people shorten
the claws.
Fur comb (double-sided)
After bathing your pet, first use the coarse side of
the fur comb
and then the fine side to comb
13
your pet's guard hair and remove knots from the fur.
Claw file
:
14
Use the claw file
after you have trimmed your
14
pet's claws with the claw clipper
cracks and damage.
Note: It is recommended that 2 people file the
claws.
Fur scissors
:
15
Use the fur scissors
15
places that are difficult to reach with pet hair clippers.

Cleaning and care

DANGER! ELECTRIC SHOCK!
Before cleaning, remove the plug from the
mains power socket.
CAUTION! PROPERTY DAMAGE!
NEVER submerse the product in water or other
liquids.
Do not use any corrosive or abrasive cleaning
agents.
Clean the housing using a damp cloth and a
mild detergent.
Switch the product off by sliding the ON / OFF
switch
to the position with the marking "0"
5
is shown.
Remove the plug from the mains socket.
Remove the trimmer guide
head
from the product (see Fig. E2 and F).
1
Note: Put the blade cover
head
before removing it from the product.
1
12 GB/IE/NI
.
11
to trim pet claws.
:
13
to remove
12
to cut your pet's fur even in
or the cutting
6
on cutting
7
Note: Never untighten the screws on cutting
head
.
1
Wash the trimmer guide
head
with running water if necessary.
1
Dry the trimmer guide
Remove any remaining bits of hair from the
cutting head
12
cleaning brush
Apply one or two drops of blade oil
between the blades and the moving parts
(see Fig. I).
Adjust the adjustment switch
after you have finished cleaning the product,
before install back the cutting head
product with click sound (see Fig. J).
Note: Clean the cutting head
guide
after every use.
6

Troubleshooting

Error
Trimming is
difficult.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
or the cutting
6
and cutting head
6
and product by using the
1
provided (see Fig. G and H).
8
to 1.8 mm
4
, trimmer
1
Cause
Solution
Hair may
Clean the cutting
be stuck
head
1
inside the
product and oil it
blades.
if necessary.
.
1
9
to the
1
and the

Advertisement

Table of Contents
loading

This manual is also suitable for:

378747 2107

Table of Contents