vacuubrand VAC 24seven Instructions For Use Manual page 43

IMPORTANT!
20901531_EN_VACUU·SELECT_V1.0_010621
Restoring the factory settings deletes all data, settings and applications. The data
logger is switched off and recording of diagnostic data is set back to Minimal .
> Back up your settings, applications and data beforehand,
see chapter: 5.2 Data logger 5.2 Data logger
5.1.9 Administration – import/export 5.1.9 Administration – import/export
Presettings for adding the controller to
your network.
Activate/deactivate remote control via
Modbus.
Default settings for serial interface and
alignment of the communication settings
(COM) for RS‑232.
Activate/deactivate remote control via
RS‑232.
Install software update from connected
USB flash drive.
Reset the controller to the factory set-
tings.
and
Main menu
43