Temperature Display; First Use - Silvercrest SEM 1100 B3 Operating Instructions Manual

Temperature display

The temperature indicator
As soon as you switch the appliance on, it starts heating up until the pointer is
approximately in the middle between 80°C and "
When the pointer reaches the red portion of the scale, the temperature is high
enough to prepare an espresso. The green heating-up control lamp
If you press the "Steam" button
goes out, and the appliance continues heating up until it reaches the range on the
scale between "
Once the pointer reaches the range between "
is high enough to produce steam. The green heating-up control lamp

First use

1) Clean the sieve holder
the drip grille
and Care".
2) Place the appliance on a level and heat-resistant surface. Ensure that a mains
power socket is in the vicinity.
3) Insert the drip grille
in the drip grille
4) Place the sieve holder
which is located next to the hot water shower
turning it clockwise until the handle of the sieve holder
("LOCK" mark).
SEM 1100 B3
indicates how far the appliance has heated up.
the green heating-up control lamp
" and " ".
, the measuring spoon
and the water tank
so that the red float
.
in the appliance by inserting the "INSERT" mark,
".
" and " ", the temperature
, the espresso sieve
as described in the section "Cleaning
can protrude through the hole
, into the appliance and then
is facing the front
GB │ IE │ NI │ CY
lights up.
lights up.
,
│ 9 ■