Temperature Display; First Use - Silvercrest SEMS 1100 B2 Operating Instructions Manual

Temperature display

The temperature indicator 1 indicates how far the appliance has heated up.
As soon as you switch the appliance on, it starts heating up until the pointer is
approximately in the middle between 80°C and "
When the pointer reaches the red portion of the scale, the temperature is high
enough to prepare an espresso. The green heating-up control lamp
lights up.
If you press the "Steam" button
goes out, and the appliance continues heating up until it reaches the range on
the scale between "
Once the pointer reaches the range between "
is high enough to produce steam. The green steam control lamp

First use

1) Clean the sieve holder i, the measuring spoon a, the espresso sieve o p,
the drip grille 9 and the water tank 5 as described in the section "Cleaning
and Care".
2) Place the appliance on a level and heat-resistant surface. Ensure that a mains
power socket is in the vicinity.
3) Insert the drip grille 9 so that the red float 8 can protrude through the hole
in the drip grille 9.
4) Place the sieve holder i in the appliance by inserting the "
mark, which is located next to the hot water shower 0, into the appliance and
then turning it clockwise until the handle of the sieve holder i is facing the
front ("
SEMS 1100 B2
" and " ".
LOCK" mark).
".
z the green heating-up control lamp
" and "
e
e
", the temperature
q lights up.
INSERT"
GB │ IE │
33 ■