Flint
- tremolo & reverb
Factory Reset
Performing a Factory Reset restores the pedal to its factory default
Power-up modes and secondary functions, and replaces all stored pre-
sets with their factory default settings�
1
Press and hold the REVERB ON footswitch while connecting power to
the pedal� Once both LEDs flash, release the footswitch�
2
Sweep the SPEED knob from 0-100% and back two times� Both LEDs
will change colors at the extremes of the knob range and blink
to indicate when the reset is taking place�
• TURN 1:
AMBER
• TURN 2:
RED
• TURN 3:
AMBER
• TURN 4: Both LEDs flash RED, Flint resets and restarts�
RED
pg 33