General Options - Strymon FLINT User Manual

Flint
- tremolo & reverb
Power Up Modes Quick Reference
Global parameters and functions can be accessed via a power up proce-
dure� All power up functions persist through power cycles�

General Options

1 Press and hold the REVERB ON footswitch while powering up Flint�
Once both LEDs flash, release the footswitch�
2 Adjust the desired functions with the knobs and buttons noted below�
3 Press either footswitch to store your changes and exit power up mode�
INPUT LEVEL
See page 14
for an illustrated
description�
BYPASS MODE
See page 15
for an illustrated
description�
SPILLOVER MODE
See page 16
for an illustrated
description�
FACTORY RESET
See page 33
for an illustrated
description�
Turn INTENSITY knob - status shown on TREMOLO ON LED
• Instrument: GREEN
• Line: RED
Turn MIX knob - status shown on REVERB ON LED
• True Bypass:
• Buffered Bypass:
Turn DECAY knob - status shown on both LEDs
• Off: AMBER (default)
• ON: PURPLE
Turn SPEED knob from 0% to 100% and back two times -
status shown on TREMOLO ON LED
(default)
GREEN (default)
RED
pg 40