El Capistan
- dTape Echo
Factory Reset
Performing a Factory Reset restores the pedal to its factory default
Power-up modes and secondary functions, and replaces all stored
presets with their factory default locations�
1
Press and hold the ON footswitch while connecting power to the pedal�
Once both LEDs flash, release the footswitch�
2
Sweep the WOW & FLUTTER knob from 0-100% and back two times�
Both LEDs will change colors at the extremes of the knob range and
blink
RED
to indicate when the reset is taking place�
• TURN 1:
AMBER
• TURN 2:
RED
• TURN 3:
AMBER
• TURN 4: Both LEDs flash RED, El Capistan resets and restarts�
pg 34