Live Edit Functions; Tremolo Boost/Cut - Strymon FLINT User Manual

Flint
- tremolo & reverb

Live Edit Functions

Use the following steps to enter Live Edit mode to access several knobs'
secondary functions� Any of the following secondary functions can be
edited while in Live Edit mode�

Tremolo Boost/Cut

Allows you to adjust a +/- 3dB volume boost or cut when the Tremolo is
On�
1 Press and hold the REVERB ON footswitch to enter Live Edit mode�
Once both LEDs flash, release the footswitch�
2 Turn the INTENSITY
amount of volume boost or cut for the Tremolo� Both ON LEDs indicate
your knob changes smoothly from -3dB cut (GREEN) at minimum to
+3dB boost (AMBER) at maximum� Unity gain is at the 12 o'clock
position (default)�
3 Press the REVERB ON footswitch to exit and store your Tremolo
Boost/Cut setting�
NOTE: The Tremolo Boost/Cut setting is saved per Favorite setting or MIDI
preset�
TREMOLO
BOOST/CUT
(TREMOLO BOOST/CUT) knob to adjust the
pg 7