Reverb Boost/Cut - Strymon FLINT User Manual

Flint
- tremolo & reverb
Live Edit Functions

Reverb Boost/Cut

Allows you to adjust a +/- 3dB volume boost or cut when the Reverb is
On�
1 Press and hold the REVERB ON footswitch to enter Live Edit mode�
Once both LEDs flash, release the footswitch�
2 Turn the MIX
boost or cut level of the Reverb� Both ON LEDs indicate your knob
changes smoothly from -3dB cut (GREEN) at minimum to +3dB
boost (AMBER) at maximum� Unity gain is at the 12 o'clock position
(default)�
3 Press the REVERB ON footswitch to exit and store your Reverb Boost/
Cut setting�
NOTE: The Reverb Boost/Cut setting is saved per Favorite setting or MIDI
preset�
(REVERB BOOST/CUT) knob to adjust the amount of
REVERB
BOOST/CUT
pg 8