Strymon FLINT User Manual page 29

Flint
- tremolo & reverb
Configuring Flint to Use MIDI
STEP 3 – SET MIDI OUT MODE
1 Press and hold the TREMOLO ON footswitch while connecting power
to the pedal� Once both LEDs flash, release the footswitch�
2 Turn the DECAY knob to select what kind of MIDI data is sent from
Flint to other MIDI devices� Both LEDs will flash momentarily to indi-
cate status�
• OFF: RED
• THRU: BLUE
without any additional MIDI messages generated by Flint�
• SEND CC, PC, OTHER: WHITE - MIDI CC, PC, and Sysex messages
generated by Flint are all sent to the MIDI Out�
• SEND CC, OTHER:
ated by Flint are sent to the MIDI Out�
• SEND PC, OTHER:
erated by Flint are sent to the MIDI Out�
• SEND OTHER:
sent to the MIDI Out�
3
Press either footswitch to store the MIDI Out mode and exit�
(default) - No MIDI messages are sent out of Flint�
- Incoming MIDI messages are sent to the MIDI Out
GREEN
PURPLE
AMBER - Sysex messages generated by Flint are
(cont�)
- MIDI CC and Sysex messages gener-
- MIDI PC and Sysex messages gen-
pg 29