Power Up Modes; Input Level - Strymon FLINT User Manual

Flint
- tremolo & reverb

Power Up Modes

Input Level

Select the input level that is routed to the effect processing�
1 Press and hold the REVERB ON footswitch while powering up Flint�
Once both LEDs flash, release the footswitch�
2 Turn the INTENSITY
mode� The TREMOLO ON LED will change color to indicate the cur-
rent status as you turn the knob�
• Instrument:
strument level source, such as a guitar or a bass�
RED
• Line:
keyboard or synthesizer� 10dB of headroom is added�
3
Press either footswitch to store the Input Level setting and begin
using Flint�
NOTE: The Input Level setting persists across power cycles and is not saved
per preset�
INPUT LEVEL
(INPUT
GREEN
(default) - Input headroom is set for an in-
- Input level is set for a line level source, such as a
LEVEL) knob to select the Input Level
pg 14