Configuring The Exp/Midi Jack - Strymon FLINT User Manual

Flint
- tremolo & reverb
Power Up Modes

Configuring the EXP/MIDI Jack

1 Press and hold the TREMOLO ON footswitch while powering up Flint�
Once both LEDs flash, release the footswitch�
2 Turn the MIX
panel's EXP/MIDI jack� The REVERB ON LED will change color to indi-
cate the current status as you turn the knob�
• Expression Pedal mode:
control over any of the knobs in any direction with a standard TRS
expression pedal� (See
• Favorite mode:
using a Strymon MiniSwitch� (See
• Tap mode:
via tap tempo using a Strymon MiniSwitch� (See
details�)
• MIDI mode:
a Strymon MultiSwitch Plus� Full MIDI functionality is available
by sending MIDI Program Change messages via 1/4" TRS MIDI
connection using a Strymon Conduit or MIDI EXP cable� Up to 300
presets are available via MIDI� (See
on page 23
(EXP/MIDI JACK) knob to select the function of the rear
GREEN
page 19
AMBER - Allows you to recall a Favorite setting
RED - Allows you to set the speed of the tremolo
BLUE - Allows for the selection of three presets using
or "Saving Presets in MIDI Mode" on page
EXP/MIDI JACK
(default) - Allows continuous
for details�)
page 20 for details�)
"Configuring MultiSwitch Plus"
page 22 for
30�)
pg 17