NOTICE Do not make unauthorized modifications. Contact NOTICE - Indicates a situation that could Baumalight at 866-820-7603. Before you weld, result in damage to the equipment or cut/drill holes, or make any other modifications. other property. New equipment components and repair parts must...
Additional information may be found at: www.asae.org or www.osha.gov. If you do not understand any part of this manual, contact Baumalight at 866-820-7603. Avoid High Pressure Fluids ^ WARNING Pressurized fluids can penetrate the Hazards From Modifying skin�...
2 Assembly Stay Clear Moving ^ WARNING Parts Prevent injury� ^ WARNING Never enter the area under raised equipment� Moving parts can cause serious injury or death� ^ WARNING Keep shields and guards in place at all Crushing hazard� times� DO NOT operate without shields and guards�...
Page 6
4. Connect front frame assembly (A) to rear frame 10. Remove mast top (D) from table. assembly (B) with hardware provided. 5. Remove brackets holding rear frame to shipping skid. 6. Connect tow vehicle to hitch on front frame. 7. Remove lifting device. 8.
Page 7
14. Connect an adequate lifting device to mast (E) 19. Connect an adequate lifting device to drive and install on table. assembly (G). 15. Fasten with hardware (F) provided. 20. Disconnect hold downs. 16. Remove lifting device. 21. Remove drive assembly. 17.
Page 8
25. Remove tile retainer (J) from shipping skid and 26. Install table extension (K) with hardware attach to front frame with hardware provided. provided. MTB MFG INC. CORPORATE HEADQUARTERS 4575 Powell Rd., Wallenstein, Ontario Canada N0B 2S0 Phone - 519.698.9864 Toll Free - 866.820.7603 Fax - 519.698.1087 www�baumalight�com...
Need help?
Do you have a question about the UNDERTOW and is the answer not in the manual?
Questions and answers