Advertisement
Step 5:
•
Align the assembled frame with threaded inserts & pre-drilled
pilot holes in the bottom of the top.
•
Using a screw gun and a 4mm hex bit, secure both frame legs to
top with 1/4"-20 x 15mm joint connector bolts. Use (8) bolts for
each frame leg.
Step 6:
•
Using a screw gun and a # S2 square bit, secure cross bar to top
with #10 x 3/4" square pan screws. Use one screw per tab with a
total of six screws being used (3 per side).
wibenchmfg.com
Cross bar
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
Qty 16
1/4"-20x15mm joint connector bolt w/ Loctite
EPIC frame
leg plate
Qty 6
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
EPIC Tables
2 Pc Hardwood Tops
#10 x 3/4" square pan screw
3
Advertisement
