Advertisement
Loose the clamping nut (1) to extend and turn the holding arm. In this way, you will also be able to adjust
the base plate and mandril supporting the holding arm. Furthermore, the motor can also be re-positioned
if the sawblade is even larger. The large number of adjustments possible ensures the proper position of
every sawblade of a diameter between 90 mm and 40 mm.
Exemplified adjustments
90 mm sawblade
230 mm sawblade
400 mm sawblade
© by WilTec Wildanger Technik GmbH
Item 30167
Page 6
http://www.WilTec.de
http://www.aoyue.eu
01
2022-1
http://www.teichtip.de
Advertisement
