Advertisement
Quick Links
Operation Manual
6, 12, 20 and 30 Tons Shop Press
51257, 51727, 51728
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 51257
Summary of Contents for WilTec 51257
- Page 1 Operation Manual 6, 12, 20 and 30 Tons Shop Press 51257, 51727, 51728 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Perform a complete oil change every year. If it should be necessary to scrap the press, the oil should be purged and disposed of properly, the rest of the press should be recycled. © by WilTec Wildanger Technik GmbH Artikel 51257, 51727, 51728 Seite 3 http://www.WilTec.de...
-
Page 4: Maintenance
Technical specifications Model Capacity 6 tons shop press 6 t 12 tons shop press 12 t 20 tons shop press 20 t 30 tons shop press 30 t © by WilTec Wildanger Technik GmbH Artikel 51257, 51727, 51728 Seite 4 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... -
Page 5: Troubleshooting
2. Improper connections 2. Clean and lubricate moving parts Piston does not fully lift Jack oil level low Add jack oil © by WilTec Wildanger Technik GmbH Artikel 51257, 51727, 51728 Seite 5 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de... - Page 6 6 tons shop press Name Traverse Fixing plate Foot Steel plate Lifter Lever © by WilTec Wildanger Technik GmbH Artikel 51257, 51727, 51728 Seite 6 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de...
- Page 7 12 tons shop press Name Qty. Name Cross Beam Pole Bolt Jack Plate Washer Steel Plate Adjust Beam Spring Crossbrace Jack Bolt Fixing plate © by WilTec Wildanger Technik GmbH Artikel 51257, 51727, 51728 Seite 7 http://www.WilTec.de http://www.aoyue.eu 11 2020-1 http://www.teichtip.de...
- Page 8 Bolt M16*150 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Artikel 51257, 51727, 51728 Seite 8 http://www.WilTec.de...
-
Page 9: Eg-Konformitätserklärung
Il a été testé à partir des normes harmonisées suivantes : EN ISO 12100:2010, EN 1494:2000+A1:2008, EN 349:1993+A1:2008, EN ISO 14120:2015, EN ISO 13857:2008 Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: Bernd Wildanger, Geschäftsführer WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Deutschland Eschweiler, 09. August 2016 Ablaufdatum 08.