WilTec HS-178 Instructions For Use

Air eraser mini abrasive gun

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments illustrations, functioning steps and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities please contact us.

http://www.wiltec.info

Instructions for Use

Air Eraser HS-178

[Mini Abrasive Gun]

ARTICLE 34178

Seite 1

Table of Contents

Need help?

Do you have a question about the HS-178 and is the answer not in the manual?

Page 1 Technical changes reserved! Due to further developments illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 1 http://www.wiltec.info...
Page 2 It is also used for lithographic work, for highlighting colour shades and correcting colour errors without damaging or spreading the surface. It is widely used for model railways. © by WilTec Wildanger Technik GmbH Seite 2 http://www.wiltec.info...
Page 3 Keep a minimum distance to allow the air/blasting agent mixture and the jet spreading. Compressors: The compressors 189 and 196 can be used with the HS-178 Air Eraser up to 40 psi. 1.Nozzle 10. Handle 2.

34178