Pride Victory XL Owner's Manual page 25

V I I . C O M F O R T
SLIDING SEAT ADJUSTMENT
You can reposition the seat forward or rearward to adjust the distance between the seat and the tiller. See figure 10.
1. Pull up on the seat sliding lever.
2. Hold the lever up and slide the seat forward or rearward into a comfortable position.
3. Release the seat sliding lever to lock the seat securely in place.
SEAT ROTATION
The seat lock lever locks the seat in one of eight positions. See figure 10.
1. Pull up on the seat lock lever to unlock the seat.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in place. If the seat is not locked into position, gently rock
the seat back and forth until you hear the lever click.
SEATBACK ADJUSTMENT
You can adjust the recline angle of the seat. See figure 11.
1. Pull up on the seat recline lever to unlock the seatback.
2. Lean forward or backward to adjust the seatback to a comfortable position.
3. Release the seat recline lever to lock the seat securely in place.
WARNING! Always keep your back pressed firmly against the seatback while adjusting the angle.
Failure to do so could result in personal injury.
ARMREST ANGLE ADJUSTMENT
The armrest angle can be adjusted upward or downward. See figure 12.
n While seated in your Scooter, turn the armrest adjustment dial to the left to lower the armrest angle or to the
right to raise the armrest angle.
NOTE: The armrests also pivot upward to make getting on and off of your Scooter easier.
SEAT RECLINE LEVER
Figure 11. Seatback Adjustment
Victory XL
All manuals and user guides at all-guides.com
A D J U S T M E N T S
ARMREST ADJUSTMENT DIAL
Figure 12. Armrest Angle Adjustment
25