Download Print this page

Advertisement

Quick Links

DJI E1200 Standard
Tuned Propulsion System
User Manual
V1.2
2015.8

Advertisement

loading
Need help?

Need help?

Do you have a question about the E1200 Standart and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for dji E1200 Standart

  • Page 1 DJI E1200 Standard Tuned Propulsion System User Manual V1.2 2015.8...
  • Page 2 “DJI”). Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI with all rights reserved. No part of this product or manual shall be reproduced in any form without the prior written consent of or authorization from DJI.
  • Page 3 The table below shows typical gain values when using the E1200 Standard with a DJI A2 flight control system and a frame which has a diagonal wheelbase of 920 mm and a takeoff weight of 8 kg:...
  • Page 4: Mounting The Motors

    The screw size is M3. Mount the motors using the appropriate screws. Note the thread depth and the size of the screws. Using screws that are too long or too large may damage the motor. 48.7 mm © 2015 DJI. All Rights Reserved.
  • Page 5 DJI website to download the DJI ESC Assistant. http://www.dji.com/product/e1200-standard/download 7. Using the DJI ESC Assistant The DJI ESC Assistant is used to upgrade the ESC’s firmware, configure the propulsion system, etc. An Updater is required and is not included with the E1200 Standard.
  • Page 6 ESC system by connecting it to a 6S LiPo battery and do not disconnect the ESC from the computer until the configuration is complete. 3) Run the DJI ESC Assistant software and wait for the ESC to connect to the program. Watch the indicators at the bottom of the screen. When the ESC has been successfully connected, the ‘Computer Connection’...
  • Page 7 2) First line up and apply thread locker into the thread of the propeller mount, then tighten the screws until the propeller blades are securely clamped and can rotate freely. © 2015 DJI. All Rights Reserved.
  • Page 8 If the two screws on the Foldable Propellers are switched or if other screws are used to mount the propeller, the marks may not be accurate. © 2015 DJI. All Rights Reserved.
  • Page 9 The content is subject to change. Download the latest version from http://www.dji.com/product/e1200-standard If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2015 DJI. All Rights Reserved.