2.
Connect the USB cable that comes bundled
with the camera to the USB cradle and the
USB port of your computer.
USB Cable (Bundled)
USB Port
A Plug
• Orient the USB plug so it correctly matches the shape of
the USB port when you connect them.
• Plug the USB cable into the ports securely, as far as it will
go. Proper operation is not possible if connections are not
correct.
Mini-B Plug
[
] (USB) Connector
197
3.
Press the camera's [ON/OFF] button to turn it
on and then press [MENU].
• Do not place the camera on the USB cradle yet.
4.
On the "Set Up" tab, select "USB" and then
press [ ].
5.
Use [ ] and [ ] to select "Mass Storage" and
then press [SET].
6.
Press the camera's [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
• Do not place the camera onto the USB cradle while it is
turned on.
• If you plan to transfer images from the camera's built-in
memory to your computer, make sure there is no memory
card loaded in the camera.
USING THE CAMERA WITH A COMPUTER