Table of Contents
Advertisement
Viewing and Storing Images on a
Computer
You can view and store images (snapshot and movie files) on
your computer by connecting to the camera via its USB cradle.
General Procedure
1) Use the USB cradle to connect the camera and computer (page
196).
2) View and copy the images you want (page 199).
■
Connecting the Camera to Your Computer
the First Time
IMPORTANT!
• If you are not using the AC adaptor to power the camera,
the battery may go low and cause the camera to turn off
while it is in the middle of exchanging files with your
computer. Use of the special AC adaptor is recommended
to power the camera.
1.
Connect the bundled AC adaptor to the [DC IN]
connector of the USB cradle and then plug it
in to a household power outlet.
• Note that the shape of the AC adaptor depends on the
area where you purchased the camera.
• If you do not plan to use the AC adaptor, make sure that
the camera's battery is fully charged.
USING THE CAMERA WITH A COMPUTER
196
Advertisement
Table of Contents
