Casio YC-430 PJ User Manual page 167

■
Copying a Single File from a Memory Card to
Built-in Memory
With this procedure, files must be copied one-by-one.
1.
Load the memory card that contains the file
you want to copy into the camera.
2.
Turn on the camera, enter the PLAY mode and
then press [MENU].
3.
On the "PLAY" tab, select "Copy" and then
press [ ].
4.
Use [ ] and [ ] to select "Card
and then press [SET].
5.
Use [ ] and [ ] to select the file you want to
copy.
6.
Use [ ] and [ ] to select "Copy" and then
press [SET].
This starts the copy operation. Wait until the "Busy... Please
wait..." message disappears from the monitor screen before
performing any operation on the camera.
• The copied image reappears on the monitor screen after
the copy operation is complete.
7.
Now you can repeat steps 5 and 6 to copy
another file, or you can exit this procedure by
pressing [MENU].
NOTE
• Files are copied to the folder in built-in memory whose
name has the largest serial number.
Built-in"
167
MANAGING YOUR FILES