Using Audio; Adding Audio To A Snapshot - Casio YC-430 PJ User Manual

USING AUDIO

Adding Audio to a Snapshot

The dubbing feature of your camera lets you add audio to a
snapshot after you shoot it. A snapshot that includes audio
(regardless of whether the audio was recorded on the spot or
added later) is indicated by the "
You can re-record a snapshot's audio whenever you want.
You can record up to about 30 seconds of audio for a snapshot.
■
Adding Audio to a Snapshot
1.
In the PLAY mode, display the snapshot to
which you want to add audio.
2.
Press [MENU].
" icon.
155
3.
On the "PLAY" tab,
select "Dubbing" and
then press [ ].
• This operation can be
performed only while a
snapshot is on the monitor
screen.
4.
Press the shutter button to start audio
recording.
5.
Press the shutter button again to stop audio
recording.
Recording will stop automatically after about 30 seconds if
you do not press the shutter button.
To play back snapshot audio
Perform the steps under "Listening to the Audio of an Audio
Snapshot" on page 127.
USING AUDIO