Cma Orientation; Install The Cma Support Bar Onto The Rail - IBM 3453-F7E Install Manual

CMA orientation

It is recommended that you connect the CMA mounting brackets on the left side of the
server as viewed from the rear of the rack. In this way, you can access the rear cables
and power supplies more easily.

Install the CMA support bar onto the rail

Step 1 Place the pin on the CMA support bar down into the slot in the rear end of
the rail.
Step 2 Rotate the other end of the support bar toward the rail on the opposite
side.
Figure 14: CMA support bar assembly (left side)
© Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node 32