Usb External Ringing Interface Module (Usb Interface Module 2 Relays 3Gv28184Aa); Installation - Alcatel-Lucent 8068S User Manual

Alcatel-Lucent Cloud Edition
DeskPhone
USB external ringing interface module (USB Interface module 2 relays
3GV28184AA)
The accessory is supported by the following
sets
The USB external ringing interface module allows driving an external system (like a ring or a lamp), following the
ring tone cadence or the communication state of the phone connected on the telephone line. No system
configuration is requested to install the module.
USB Interface module 2 relays lets to connect directly one or 2 external ringings on the USB connector of your
deskphone:
List of supplies
•
USB external ringing interface module.
•
1 USB cable 1,5 m (4,9 feet) USB type A - USB type B.

8.3.1 Installation

WARNING: The module must be closed before use. No settings require the module to be open.
In idle state:
Typical usage diagram:
Phase
The breaking capacity is 12V/24V DC 15A or 120V/220V AC at 10A.
8AL90362ENRB ed01
8068s CE
Relay 2
Relay 1
Ringing or during
communication:
Neutral
The lamp lights up when the phone is in communication.
8058s CE 8018 CE
The phone is in audio communication.
The relay is active as long as the phone is
in communication.
The phone is ringing. The relay follows
exactly the ring signal.
N: Common.
NC: active signal.
NO: non-active signal.
8008/8008G CE
69 /86